# Cura 2.0 quick print; Canned settings for .35 or .5 nozzle?

**URL:** <https://forum.lulzbot.com/t/cura-2-0-quick-print-canned-settings-for-35-or-5-nozzle/3854>\
**Category:** Software\
**Created:** [August 13, 2016, 4:07am UTC](https://forum.lulzbot.com/t/cura-2-0-quick-print-canned-settings-for-35-or-5-nozzle/3854 "2016-08-13T04:07:22Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![tmiller](https://avatars.discourse-cdn.com/v4/letter/t/cab0a1/32.png) [@tmiller](https://forum.lulzbot.com/u/tmiller)\
**Post date:** [August 13, 2016, 4:07am UTC](https://forum.lulzbot.com/t/cura-2-0-quick-print-canned-settings-for-35-or-5-nozzle/3854/1 "2016-08-13T04:07:22Z")

</div>

I suspect this has been asked many times and/or documented someplace but I can’t find it. 😕  
When downloading profiles from the support page, one must choose either the .35 or .5 profiles.  
In Cura, I’m guessing that all of the quick print settings are for .35 nozzle and one must download the .5 profiles as needed.  
Thanks in advance\_ **!** \_  
t

---

<div class="post-metadata">

**Author:** ![kmanley57](https://avatars.discourse-cdn.com/v4/letter/k/13edae/32.png) [@kmanley57](https://forum.lulzbot.com/u/kmanley57)\
**Post date:** [August 13, 2016, 1:57pm UTC](https://forum.lulzbot.com/t/cura-2-0-quick-print-canned-settings-for-35-or-5-nozzle/3854/2 "2016-08-13T13:57:03Z")

</div>

> [@tmiller](#):
>
> I suspect this has been asked many times and/or documented someplace but I can’t find it. 😕  
> When downloading profiles from the support page, one must choose either the .35 or .5 profiles.  
> In Cura, I’m guessing that all of the quick print settings are for .35 nozzle and one must download the .5 profiles as needed.  
> Thanks in advance\_ **!** \_  
> t

I think it uses the quick print profile for the size of printer nozzle your printer you set it up for has.

Example:  
The Taz 5 .5MM printer uses the .5MM quick print profiles  
The Taz 4 .35MM printer uses the .35MM quick print profiles.

But if you got a .35 Taz 5 extruder then you might need to download .35MM profiles to match the different nozzle size.

---

<div class="post-metadata">

**Author:** ![tmiller](https://avatars.discourse-cdn.com/v4/letter/t/cab0a1/32.png) [@tmiller](https://forum.lulzbot.com/u/tmiller)\
**Post date:** [August 15, 2016, 2:29pm UTC](https://forum.lulzbot.com/t/cura-2-0-quick-print-canned-settings-for-35-or-5-nozzle/3854/3 "2016-08-15T14:29:04Z")

</div>

Thank you for the reminder - I completely forgot about the Machine settings in Cura.  
Feeling kind of dense 😊  
t