# Cura 3.1.1 Windows 7

**URL:** <https://forum.lulzbot.com/t/cura-3-1-1-windows-7/5512>\
**Category:** Software\
**Created:** [January 18, 2018, 12:50pm UTC](https://forum.lulzbot.com/t/cura-3-1-1-windows-7/5512 "2018-01-18T12:50:41Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![doenute](https://avatars.discourse-cdn.com/v4/letter/d/958977/32.png) [@doenute](https://forum.lulzbot.com/u/doenute)\
**Post date:** [January 18, 2018, 12:50pm UTC](https://forum.lulzbot.com/t/cura-3-1-1-windows-7/5512/1 "2018-01-18T12:50:41Z")

</div>

Program does not make it past selecting a new printer. I select Taz 6 Flexydually V2 and it immediately and consistently throws standard Windows error about checking for solution online and shuts down

---

<div class="post-metadata">

**Author:** ![Brent.I](https://avatars.discourse-cdn.com/v4/letter/b/ecc23a/32.png) [@Brent.I](https://forum.lulzbot.com/u/Brent.I)\
**Post date:** [January 18, 2018, 2:09pm UTC](https://forum.lulzbot.com/t/cura-3-1-1-windows-7/5512/2 "2018-01-18T14:09:30Z")

</div>

We have just finished merging in upstream 3.1 ([https://code.alephobjects.com/T1152](https://code.alephobjects.com/T1152)), and have not done any testing as of yet. It will likely be a couple weeks until we have the Cura LulzBot Edition 3.1.xx branch in a functional state. For now we recommend sticking with Cura LulzBot Edition 2.6.66.

---

<div class="post-metadata">

**Author:** ![doenute](https://avatars.discourse-cdn.com/v4/letter/d/958977/32.png) [@doenute](https://forum.lulzbot.com/u/doenute)\
**Post date:** [January 18, 2018, 4:19pm UTC](https://forum.lulzbot.com/t/cura-3-1-1-windows-7/5512/3 "2018-01-18T16:19:20Z")

</div>

Ok thanks for headsup