# Cura main branch equivalents

**URL:** <https://forum.lulzbot.com/t/cura-main-branch-equivalents/24019>\
**Category:** Software\
**Created:** [December 21, 2021, 4:08pm UTC](https://forum.lulzbot.com/t/cura-main-branch-equivalents/24019 "2021-12-21T16:08:41Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![trashcat](https://avatars.discourse-cdn.com/v4/letter/t/858c86/32.png) [@trashcat](https://forum.lulzbot.com/u/trashcat)\
**Post date:** [December 21, 2021, 4:08pm UTC](https://forum.lulzbot.com/t/cura-main-branch-equivalents/24019/1 "2021-12-21T16:08:41Z")

</div>

I was wondering what the equivalent settings in the main branch of Cura are for probe, soften, and wipe temperature? Or if they don’t exist, is there a relatively easy way to recreate them? Or am I just out of luck? I imagine I could edit the start gcode on a per-material basis, but I’d rather not get into that. With Petg I was having trouble probing at the print temperatrure of 235 (oozing).

…I like working from the main branch as my other printer is set up in there and I find it to have a few more options and fewer bugs.

---

<div class="post-metadata">

**Author:** ![rhenderson](https://avatars.discourse-cdn.com/v4/letter/r/9de0a6/32.png) [@rhenderson](https://forum.lulzbot.com/u/rhenderson)\
**Post date:** [December 21, 2021, 5:16pm UTC](https://forum.lulzbot.com/t/cura-main-branch-equivalents/24019/2 "2021-12-21T17:16:24Z")

</div>

Short answer is that manual editing of the gcode is the only solution currently available. The long answer is we are waiting for ultimaker to change the behavior [Adding Official Profiles for LulzBot Machines by rhendersonLulzbot · Pull Request #10232 · Ultimaker/Cura · GitHub](https://github.com/Ultimaker/Cura/pull/10232) .