# Cura: No supports on overhangs, even at 0 degrees

**URL:** https://forum.lulzbot.com/t/cura-no-supports-on-overhangs-even-at-0-degrees/5273
**Category:** Software
**Created:** [October 24, 2017, 12:22am UTC](https://forum.lulzbot.com/t/cura-no-supports-on-overhangs-even-at-0-degrees/5273 "2017-10-24T00:22:41Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![bentwookie](https://avatars.discourse-cdn.com/v4/letter/b/e47c2d/32.png) [@bentwookie](https://forum.lulzbot.com/u/bentwookie)
#### Post date: [October 24, 2017, 12:22am UTC](https://forum.lulzbot.com/t/cura-no-supports-on-overhangs-even-at-0-degrees/5273/1 "2017-10-24T00:22:41Z")

</div>

I have a part that really wants some small supports, but I can’t get Cura to generate them. I’ve gone to Full Settings, enabled Everywhere support and set the support angle to 0. I’ve tried bigger/smaller numbers for just about everything but can’t get it generate them.

I’m printing using PETG which (in my experience) doesn’t have amazing bridging support. Is there some internal setting for how far it things it can push things horizontally before needing a support?

Here’s a screen shot of my settings. Thanks!

 ![Screen Shot 2017-10-23 at 5.17.36 PM.png](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/5/5a9889b06ab1b369c102cf6f67874a57f35470be.png)

---

<div class="post-metadata">

### Author: ![anneg](https://avatars.discourse-cdn.com/v4/letter/a/dc4da7/32.png) [@anneg](https://forum.lulzbot.com/u/anneg)
#### Post date: [October 26, 2017, 6:40pm UTC](https://forum.lulzbot.com/t/cura-no-supports-on-overhangs-even-at-0-degrees/5273/2 "2017-10-26T18:40:14Z")

</div>

What happens at 45 degrees? What are your other overhang settings? Fill Amount? Distance x/y? Distance z?

---

<div class="post-metadata">

### Author: ![kmanley57](https://avatars.discourse-cdn.com/v4/letter/k/13edae/32.png) [@kmanley57](https://forum.lulzbot.com/u/kmanley57)
#### Post date: [October 26, 2017, 6:51pm UTC](https://forum.lulzbot.com/t/cura-no-supports-on-overhangs-even-at-0-degrees/5273/3 "2017-10-26T18:51:54Z")

</div>

Try moving the scroll bar to the right there, it may not just be displaying them correctly but they may be there when you check like layer 4-5.

---

<div class="post-metadata">

### Author: ![TomsCables](https://avatars.discourse-cdn.com/v4/letter/t/87869e/32.png) [@TomsCables](https://forum.lulzbot.com/u/TomsCables)
#### Post date: [November 14, 2017, 8:24pm UTC](https://forum.lulzbot.com/t/cura-no-supports-on-overhangs-even-at-0-degrees/5273/4 "2017-11-14T20:24:49Z")

</div>

I’ve been having the same problem. I posted about it here  
[https://forum.lulzbot.com/t/cura-support-structure-not-fully-supporting-round-objects/2241/15](https://forum.lulzbot.com/t/cura-support-structure-not-fully-supporting-round-objects/2241/15)

It seems to be fixed in Cura 3.0. But I’m trying to get some info on how we can run it on our Taz printers.