# CURA PAUSING ISSUE!!!!!!!!!!!!!!!!!!!

**URL:** <https://forum.lulzbot.com/t/cura-pausing-issue/4547>\
**Category:** Software\
**Created:** [February 4, 2017, 3:38pm UTC](https://forum.lulzbot.com/t/cura-pausing-issue/4547 "2017-02-04T15:38:08Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ryankimharrison](https://avatars.discourse-cdn.com/v4/letter/r/ee59a6/32.png) [@Ryankimharrison](https://forum.lulzbot.com/u/Ryankimharrison)\
**Post date:** [February 4, 2017, 3:38pm UTC](https://forum.lulzbot.com/t/cura-pausing-issue/4547/1 "2017-02-04T15:38:08Z")

</div>

There is this feature in cura where you can set it to pause after a certian amount of mm. I did that, and then i reloaded in the filament, extruded some, and it worked fine. But when it started printing again, It retracted like, 100 MM!!! it went thru 3 more layers without extruding anything and then started printing into midair. HOW CAN I FIX THIS!!!  
  
  
RYANKIMHARRISON