# Cura window using the Print Monitor tab

**URL:** https://forum.lulzbot.com/t/cura-window-using-the-print-monitor-tab/6524
**Category:** Software
**Created:** [February 21, 2019, 8:38pm UTC](https://forum.lulzbot.com/t/cura-window-using-the-print-monitor-tab/6524 "2019-02-21T20:38:04Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![fa001](https://avatars.discourse-cdn.com/v4/letter/f/e56c9b/32.png) [@fa001](https://forum.lulzbot.com/u/fa001)
#### Post date: [February 21, 2019, 8:38pm UTC](https://forum.lulzbot.com/t/cura-window-using-the-print-monitor-tab/6524/1 "2019-02-21T20:38:04Z")

</div>

I just install Cura V3.6.3 for my Mini.  
I do not see the Print Monitor tab.  
Is there a setting that I missed?

---

<div class="post-metadata">

### Author: ![Orias](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/orias/32/3_2.png) [@Orias](https://forum.lulzbot.com/u/Orias)
#### Post date: [February 22, 2019, 4:23pm UTC](https://forum.lulzbot.com/t/cura-window-using-the-print-monitor-tab/6524/2 "2019-02-22T16:23:54Z")

</div>

The Monitor tab should be visible above the virtual print surface. If you don’t see that, try to reinstall making sure to clear your cache following the instructions linked at [LulzBot.com/Cura](https://lulzbot.com/cura).

 ![Cura LulzBot Edition - 3.6.3_036.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/6/6b90e8a1fb788d6d9d42b1d9f5cc931d52cae502.jpeg)  
If you still don’t see the Monitor tab after that, reach out to the support team at [LulzBot.com/Support](https://lulzbot.com/support) with the following information:

- Operating system & version
- Screenshot of Cura LE 3.6.3 window
- Cura LE logs: [Log locations](https://code.alephobjects.com/w/cura-lulzbot/bug_report/)

---

<div class="post-metadata">

### Author: ![fa001](https://avatars.discourse-cdn.com/v4/letter/f/e56c9b/32.png) [@fa001](https://forum.lulzbot.com/u/fa001)
#### Post date: [February 22, 2019, 6:11pm UTC](https://forum.lulzbot.com/t/cura-window-using-the-print-monitor-tab/6524/3 "2019-02-22T18:11:46Z")

</div>

Thanks for the reply but I was not clear perhaps a picture will help.  
The left side of the UI that I get looks like:  
 ![curaHelp.JPG](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/7/742f4613fe60a7508fee326a0676197d3da6e679.jpeg)  
The help video shows a UI that looks like:  
curaHelp.JPG  
What I want is the control pad that allows one to control the machine.  
All of the bottom part shown in the help video.

---

<div class="post-metadata">

### Author: ![fa001](https://avatars.discourse-cdn.com/v4/letter/f/e56c9b/32.png) [@fa001](https://forum.lulzbot.com/u/fa001)
#### Post date: [February 22, 2019, 7:36pm UTC](https://forum.lulzbot.com/t/cura-window-using-the-print-monitor-tab/6524/4 "2019-02-22T19:36:58Z")

</div>

Thanks Orias, I followed your suggestion and did a reinstall. But first I removed all previous versions of Cura and cleaned the cache again. Now I get the control pad.