# Custom 50 micron layer build height

**URL:** <https://forum.lulzbot.com/t/custom-50-micron-layer-build-height/23881>\
**Category:** General\
**Created:** [November 1, 2021, 7:52am UTC](https://forum.lulzbot.com/t/custom-50-micron-layer-build-height/23881 "2021-11-01T07:52:40Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![DamoD](https://avatars.discourse-cdn.com/v4/letter/d/da6949/32.png) [@DamoD](https://forum.lulzbot.com/u/DamoD)\
**Post date:** [November 1, 2021, 7:52am UTC](https://forum.lulzbot.com/t/custom-50-micron-layer-build-height/23881/1 "2021-11-01T07:52:40Z")

</div>

Hello, please help !

I own the Mini 2 and would like to print in 50 micron layers. I note that “high Detail” is 180 micron (0.18mm)

Am I right to assume the Mini 2 can accommodate such small and accurate adjustments, its just reduced stepper revolutions, are the screw pitches ok, or do I need finer pitched screws ?

Appreciate the publics help on this one

Thanks

Damien D

---

<div class="post-metadata">

**Author:** ![rhenderson](https://avatars.discourse-cdn.com/v4/letter/r/9de0a6/32.png) [@rhenderson](https://forum.lulzbot.com/u/rhenderson)\
**Post date:** [November 1, 2021, 12:59pm UTC](https://forum.lulzbot.com/t/custom-50-micron-layer-build-height/23881/2 "2021-11-01T12:59:18Z")

</div>

I believe if you have the SL tool head and look at the Ultra-High detail profile we set it to 0.050mm .