# Diagram with part ids for the mini?

**URL:** <https://forum.lulzbot.com/t/diagram-with-part-ids-for-the-mini/1755>\
**Category:** LulzBot Mini\
**Created:** [May 14, 2015, 3:53am UTC](https://forum.lulzbot.com/t/diagram-with-part-ids-for-the-mini/1755 "2015-05-14T03:53:37Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![chuckmcknight](https://avatars.discourse-cdn.com/v4/letter/c/49beb7/32.png) [@chuckmcknight](https://forum.lulzbot.com/u/chuckmcknight)\
**Post date:** [May 14, 2015, 3:53am UTC](https://forum.lulzbot.com/t/diagram-with-part-ids-for-the-mini/1755/1 "2015-05-14T03:53:37Z")

</div>

Hi,

I’m trying to figure out which heat set insert is used on the filament arm that holds the spool. I’m designing some things that I think will need that level of support. It looks like an M5, but I’m not completely sure that is what it is. Can anyone provide that information?

Thanks!

Charles McKnight

---

<div class="post-metadata">

**Author:** ![piercet](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/piercet/32/12_2.png) [@piercet](https://forum.lulzbot.com/u/piercet)\
**Post date:** [May 14, 2015, 4:00am UTC](https://forum.lulzbot.com/t/diagram-with-part-ids-for-the-mini/1755/2 "2015-05-14T04:00:24Z")

</div>

Assuming you are talking about this part here: [http://devel.lulzbot.com/mini/daffodil/production\_parts/printed\_parts/spool\_mount\_Mini/](http://devel.lulzbot.com/mini/daffodil/production_parts/printed_parts/spool_mount_Mini/)  
they are definitly sized for an M5 insert. Probably the long ones but I am not sure.