# Ditto printing

**URL:** <https://forum.lulzbot.com/t/ditto-printing/4738>\
**Category:** Software\
**Created:** [March 26, 2017, 4:22pm UTC](https://forum.lulzbot.com/t/ditto-printing/4738 "2017-03-26T16:22:08Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kaydmayd](https://avatars.discourse-cdn.com/v4/letter/k/e9c0ed/32.png) [@Kaydmayd](https://forum.lulzbot.com/u/Kaydmayd)\
**Post date:** [March 26, 2017, 4:22pm UTC](https://forum.lulzbot.com/t/ditto-printing/4738/1 "2017-03-26T16:22:08Z")

</div>

Hello everyone. I’m trying to figure out how to convince my taz 6 and dual extruder to ditto print. I have thoroughly searched and found one thread from a few years ago where someone from lulzbot added a second extruder head but nothing about using the factory dual extruder. I called tech support but they told me it won’t work. I find it hard to believe but I am no expert. Any thoughts? I’m not against doing some creative wiring if I have to but it seems like there should be an easier way.  
Thanks for any help.
