# Does Mini Flexystruder tool head work for non-flex?

**URL:** <https://forum.lulzbot.com/t/does-mini-flexystruder-tool-head-work-for-non-flex/5037>\
**Category:** Hardware\
**Created:** [July 8, 2017, 9:37pm UTC](https://forum.lulzbot.com/t/does-mini-flexystruder-tool-head-work-for-non-flex/5037 "2017-07-08T21:37:56Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![allanamiller](https://avatars.discourse-cdn.com/v4/letter/a/bbe5ce/32.png) [@allanamiller](https://forum.lulzbot.com/u/allanamiller)\
**Post date:** [July 8, 2017, 9:37pm UTC](https://forum.lulzbot.com/t/does-mini-flexystruder-tool-head-work-for-non-flex/5037/1 "2017-07-08T21:37:56Z")

</div>

Hi, this may be a really obvious question, so I apologize if that is the case. I’m about to install my shiny new Mini Flexystruder head to print some Ninja Flex. After I do that, can I use it to print the filaments I have been using, like PLA, ABS, and nylon? Or, do I need to put back the original print head for those materials?

TIA for advice on this!

Allan Miller