# Droopy Overhangs

**URL:** <https://forum.lulzbot.com/t/droopy-overhangs/6499>\
**Category:** Software\
**Created:** [February 12, 2019, 1:49pm UTC](https://forum.lulzbot.com/t/droopy-overhangs/6499 "2019-02-12T13:49:16Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![underdog1924](https://avatars.discourse-cdn.com/v4/letter/u/e56c9b/32.png) [@underdog1924](https://forum.lulzbot.com/u/underdog1924)\
**Post date:** [February 12, 2019, 1:49pm UTC](https://forum.lulzbot.com/t/droopy-overhangs/6499/1 "2019-02-12T13:49:16Z")

</div>

I’ve tried printing these items on a Lulzbot Taz 4 and Lulzbot Mini 1. Both have droopy overhangs. The slicing programs determine that supports are not needed so I’m not quite sure what to do here. Any suggestions?

---

<div class="post-metadata">

**Author:** ![Orias](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/orias/32/3_2.png) [@Orias](https://forum.lulzbot.com/u/Orias)\
**Post date:** [February 13, 2019, 7:38pm UTC](https://forum.lulzbot.com/t/droopy-overhangs/6499/2 "2019-02-13T19:38:29Z")

</div>

Reach out to the support team for help, at [LulzBot.com/Support](https://lulzbot.com/support). Include any pictures you have and information on the version of Cura LulzBot Edition used, the print profile used, and the brand of filament.