# dual extruder

**URL:** <https://forum.lulzbot.com/t/dual-extruder/2407>\
**Category:** LulzBot TAZ\
**Created:** [October 31, 2015, 10:45pm UTC](https://forum.lulzbot.com/t/dual-extruder/2407 "2015-10-31T22:45:30Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![tjacquart](https://avatars.discourse-cdn.com/v4/letter/t/22d042/32.png) [@tjacquart](https://forum.lulzbot.com/u/tjacquart)\
**Post date:** [October 31, 2015, 10:45pm UTC](https://forum.lulzbot.com/t/dual-extruder/2407/1 "2015-10-31T22:45:30Z")

</div>

In my humble opinion, the dual extruders option (like 400$ !!!) is Way too( expensive for a 2k€ printer unable to print carbon filament due to a simple brass nozzle problem. A hardened steel piece would could about noting on the whole… Why ?