# Dual Extruders and the TAZ

**URL:** <https://forum.lulzbot.com/t/dual-extruders-and-the-taz/91>\
**Category:** Hardware\
**Created:** [May 23, 2013, 2:50pm UTC](https://forum.lulzbot.com/t/dual-extruders-and-the-taz/91 "2013-05-23T14:50:28Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![Orias](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/orias/32/3_2.png) [@Orias](https://forum.lulzbot.com/u/Orias)\
**Post date:** [May 23, 2013, 2:50pm UTC](https://forum.lulzbot.com/t/dual-extruders-and-the-taz/91/1 "2013-05-23T14:50:28Z")

</div>

We’ve have been getting a lot of questions in regards to dual extruders and the LulzBot TAZ. We’ve done some work with a dual extruder setup. Here are some links to some of the work and items. Please keep in mind that it’s still somewhat experimental. I would be interested in hearing about your progress, for I hope to do the same!

![](http://devel.lulzbot.com/filament/HIPS/gavroche/1024x768/DSC_0112.JPG)

Dual extruder mount: [http://devel.lulzbot.com/TK-0/TestObjects/dual/double\_extruder\_mount\_2.STL](http://devel.lulzbot.com/TK-0/TestObjects/dual/double_extruder_mount_2.STL)

Reversed Wades: [http://devel.lulzbot.com/AO-100/hardware/dual/dual\_mount/jonaskuehling\_gregs-wade-v3\_mirrored\_repaired.stl](http://devel.lulzbot.com/AO-100/hardware/dual/dual_mount/jonaskuehling_gregs-wade-v3_mirrored_repaired.stl)

More links:  
HIPS testing for support material: [http://devel.lulzbot.com/filament/HIPS/](http://devel.lulzbot.com/filament/HIPS/)  
Dual extruders and the AO-101: [https://forum.lulzbot.com/t/dual-extruders-and-the-ao-100/41/1](https://forum.lulzbot.com/t/dual-extruders-and-the-ao-100/41/1)  
TAZ testing: [http://devel.lulzbot.com/TK-0/TestObjects/dual/](http://devel.lulzbot.com/TK-0/TestObjects/dual/)

---

_[View the full topic](https://forum.lulzbot.com/t/dual-extruders-and-the-taz/91)._