# Einsy Rambo 1.1 Mini 1

**URL:** <https://forum.lulzbot.com/t/einsy-rambo-1-1-mini-1/5950>\
**Category:** Software\
**Created:** [June 11, 2018, 1:48pm UTC](https://forum.lulzbot.com/t/einsy-rambo-1-1-mini-1/5950 "2018-06-11T13:48:21Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![beepboopclick](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/beepboopclick/32/54_2.png) [@beepboopclick](https://forum.lulzbot.com/u/beepboopclick)\
**Post date:** [June 11, 2018, 1:48pm UTC](https://forum.lulzbot.com/t/einsy-rambo-1-1-mini-1/5950/1 "2018-06-11T13:48:21Z")

</div>

So let’s say I were getting an Einsy Rambo to put in my original Mini. What are thoughts on the best way to deal with the firmware for that? I’m not particularly concerned about catching skipping or power loss etc right now, I mostly just want my mini to be quieter. The two most likely scenarios seem to be recompile the mini 1 firmware with options for taking advantage of the quieter trinamic drivers or waiting for the mini 2 firmware and setting the print area to match the mini 1. I haven’t looked into the firmware changes necessary for bed leveling, but I expect that taking the Prusa firmware and trying to adapt that to the mini will be the… most difficult path, but the first option may be a close second. Has anyone given this more thought than I have so far?

---

_[View the full topic](https://forum.lulzbot.com/t/einsy-rambo-1-1-mini-1/5950)._