# Enclosures for TAZ6

**URL:** <https://forum.lulzbot.com/t/enclosures-for-taz6/22255>\
**Category:** General\
**Created:** [August 31, 2020, 2:42pm UTC](https://forum.lulzbot.com/t/enclosures-for-taz6/22255 "2020-08-31T14:42:32Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![the\_geez54](https://avatars.discourse-cdn.com/v4/letter/t/cdc98d/32.png) [@the\_geez54](https://forum.lulzbot.com/u/the_geez54)\
**Post date:** [August 31, 2020, 2:42pm UTC](https://forum.lulzbot.com/t/enclosures-for-taz6/22255/1 "2020-08-31T14:42:32Z")

</div>

I need a new enclosure for a TAZ-6, I’d prefer something commercially available.

Does anyone have advice or experience to offer on suppliers or places to shop?

---

<div class="post-metadata">

**Author:** ![TheVirtualTim](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/thevirtualtim/32/9965_2.png) [@TheVirtualTim](https://forum.lulzbot.com/u/TheVirtualTim)\
**Post date:** [August 31, 2020, 3:32pm UTC](https://forum.lulzbot.com/t/enclosures-for-taz6/22255/2 "2020-08-31T15:32:14Z")

</div>

I have one of these for my TAZ Workhorse, but here’s a link to their TAZ 6 model:

> **[TAZ 6 ABS+ Compatible Safety Enclosure by Printed Solid](https://www.printedsolid.com/products/safety-enclosure-taz-6-abs?variant=32412213215317)**
>
> A flat packed kit of acrylic panels and fasteners to assemble a safety enclosure for the Lulzbot Taz 6 3D Printer.

---

<div class="post-metadata">

**Author:** ![Duanecr](https://avatars.discourse-cdn.com/v4/letter/d/fbc32d/32.png) [@Duanecr](https://forum.lulzbot.com/u/Duanecr)\
**Post date:** [September 2, 2020, 1:23pm UTC](https://forum.lulzbot.com/t/enclosures-for-taz6/22255/3 "2020-09-02T13:23:20Z")

</div>

I got an enclosure like the one linked below. The front comes off easily, but you have to be a little careful with it so the acrylic panels don’t crack or break. I’ve been using this for over a year without any major problems. I like it a little better than the one with the solid color sides. It’s a little cheaper as well.

> **[LulzBot TAZ 6 Enclosure Kit](https://www.matterhackers.com/store/l/lulzbot-taz-6-enclosure-kit/sk/M12AFNLR)**
>
> Are you looking to upgrade your TAZ 6 3D printer? Well we have the LulzBot TAZ 6 Enclosure Kit that is unbeatable! This enclosure safety kit is made up of acrylic panels that sit on the same surface as your LulzBot Taz 6 3D printer. This kit was...

---

<div class="post-metadata">

**Author:** ![HillMakeItBetter](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/hillmakeitbetter/32/10622_2.png) [@HillMakeItBetter](https://forum.lulzbot.com/u/HillMakeItBetter)\
**Post date:** [September 4, 2020, 12:51am UTC](https://forum.lulzbot.com/t/enclosures-for-taz6/22255/4 "2020-09-04T00:51:10Z")

</div>

Ive used the one from Printed Solid for over 2 years. A bit flimsy if you’re not careful but it does fine. And this IS on an office.

> **[@hillmakeitbetter](https://www.instagram.com/p/B-sM2Aohu6D)**