# eSUN HIPS Issues

**URL:** <https://forum.lulzbot.com/t/esun-hips-issues/5822>\
**Category:** Filament\
**Created:** [April 19, 2018, 12:52pm UTC](https://forum.lulzbot.com/t/esun-hips-issues/5822 "2018-04-19T12:52:27Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![ktwelch](https://avatars.discourse-cdn.com/v4/letter/k/96bed5/32.png) [@ktwelch](https://forum.lulzbot.com/u/ktwelch)\
**Post date:** [April 19, 2018, 12:52pm UTC](https://forum.lulzbot.com/t/esun-hips-issues/5822/1 "2018-04-19T12:52:27Z")

</div>

I have been printing with my Taz6 for about 6 months now in my classroom. I have been using PLA mostly and haven’t had any issues. I recently bought several spools of eSUN HIPS on sale. Since there is not a profile for it in Cura, I tried some of the other ones but encountered several problems such as the temp was too low and I was getting a lot of delimitation, releasing from the bed, and warping. After doing some research and working with the settings, I was able to get a pretty good print on my practice item but still not great. Warping and releasing from the bed are still problems - especially when printing multiple parts. Anyone have a best settings for this filament? Thanks!

---

<div class="post-metadata">

**Author:** ![ktwelch](https://avatars.discourse-cdn.com/v4/letter/k/96bed5/32.png) [@ktwelch](https://forum.lulzbot.com/u/ktwelch)\
**Post date:** [April 20, 2018, 5:53pm UTC](https://forum.lulzbot.com/t/esun-hips-issues/5822/2 "2018-04-20T17:53:01Z")

</div>

I have found a solution. After tweaking the settings (temp, speed, flow, etc.) I got a pretty good print but still suffer from warping. So, I got an older version of Cura (I still like that interface better) and it had the eSUN HIPS profile in it. I printed the same model using that pre-set and it came out perfect with no warping. Lulzbot does a great job tuning their profiles!

---

<div class="post-metadata">

**Author:** ![glowglowdancer](https://avatars.discourse-cdn.com/v4/letter/g/45deac/32.png) [@glowglowdancer](https://forum.lulzbot.com/u/glowglowdancer)\
**Post date:** [May 16, 2018, 3:04am UTC](https://forum.lulzbot.com/t/esun-hips-issues/5822/3 "2018-05-16T03:04:10Z")

</div>

Hi Ktwelch,  
Can you provide which version of cura you used, or a copy of the settings that worked? ![:ugeek:](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/1X/60aa0bc609d6c1cf1242a151e9c1410e4f9e6e44.gif "Uber Geek")