# eSun PLA+ settings ? **URL:** \ **Category:** Filament\ **Created:** [September 23, 2019, 11:27pm UTC](https://forum.lulzbot.com/t/esun-pla-settings/6917 "2019-09-23T23:27:35Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![E-Dub](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/e-dub/32/9796_2.png) [@E-Dub](https://forum.lulzbot.com/u/E-Dub)\ **Post date:** [September 23, 2019, 11:27pm UTC](https://forum.lulzbot.com/t/esun-pla-settings/6917/1 "2019-09-23T23:27:35Z")
Hi there, does anyone have a fully tuned material profile for eSun PLA+ on the Lulzbot Mini? We have experienced OK results working from the Polylite PLA profile, except that it’s really difficult to remove from the bed when it’s finished. We are newbies and this is our first time playing with filament that doesn’t have a profile already loaded in Cura. ---
**Author:** ![EmileLooni](https://avatars.discourse-cdn.com/v4/letter/e/9de053/32.png) [@EmileLooni](https://forum.lulzbot.com/u/EmileLooni)\ **Post date:** [October 13, 2019, 5:21pm UTC](https://forum.lulzbot.com/t/esun-pla-settings/6917/2 "2019-10-13T17:21:22Z")
just look for any pla. pla from esun isnt the same as pla from another comapny. its just a name esun gave their premium pla line. its not a specific type of pla. ---
**Author:** ![bbc0](https://avatars.discourse-cdn.com/v4/letter/b/e8c25b/32.png) [@bbc0](https://forum.lulzbot.com/u/bbc0)\ **Post date:** [August 9, 2020, 4:41pm UTC](https://forum.lulzbot.com/t/esun-pla-settings/6917/3 "2020-08-09T16:41:29Z")
I recently got some PLA+ from eSun. I used the temperature setting they recommended in my Mini and it printed nicely. I did stick a little tighter than usual but I was able to get my very sharp putty knife under one corner and it popped off the bed OK. I use OctoPi so I didn’t re-slice in Cura but just added 20 degs in OctoPi which worked well.