# Extreemly happy1

**URL:** <https://forum.lulzbot.com/t/extreemly-happy1/1451>\
**Category:** Hardware\
**Created:** [March 13, 2015, 2:17am UTC](https://forum.lulzbot.com/t/extreemly-happy1/1451 "2015-03-13T02:17:26Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![Muggs](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/muggs/32/9237_2.png) [@Muggs](https://forum.lulzbot.com/u/Muggs)\
**Post date:** [March 13, 2015, 2:17am UTC](https://forum.lulzbot.com/t/extreemly-happy1/1451/1 "2015-03-13T02:17:26Z")

</div>

Hello All,

OK, I went through Mike’s excellent guide to great prints. Payed off big time!

I make my first part tonight SHHHH don’t tell Mike, I was supposed to print something simple many, Many, MANY times, but I couldn’t help myself.  
OK, well this is pretty simple. I make a calculation cube in SolidWorks that is 1x1x1" with four walls (DUH) of 0.040", 0.060", 0.100", and 0.125". With a 0.625" hole in the center floor.  
Well see for yourself the results:

 ![IMG_0876.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/d/d057c54d55a445d73bb08bda9950dc17b7ad867c.jpeg)  
 ![IMG_0875.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/c/c290d05c4fa5671d7d7ac51043aa8398a5027797.jpeg)  
 ![IMG_0874.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/5/514be2dc433727a7c58b20eefc6fd78dcd697d81.jpeg)  
 ![IMG_0873.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/8/822c960b1098a8078055ed2a5b2a0634363078bb.jpeg)  
 ![IMG_0872.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/9/92d2b4239226ad8b640ebcd394fec6fc73f75e00.jpeg)  
 ![IMG_0871.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/3/33bbd36f162f3ad1f3805506188f34cf3374c83b.jpeg)

---

_[View the full topic](https://forum.lulzbot.com/t/extreemly-happy1/1451)._