# filament feed problem - clog?

**URL:** <https://forum.lulzbot.com/t/filament-feed-problem-clog/5642>\
**Category:** LulzBot Mini\
**Created:** [February 20, 2018, 9:45pm UTC](https://forum.lulzbot.com/t/filament-feed-problem-clog/5642 "2018-02-20T21:45:37Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![ScottW](https://avatars.discourse-cdn.com/v4/letter/s/53a042/32.png) [@ScottW](https://forum.lulzbot.com/u/ScottW)\
**Post date:** [February 21, 2018, 2:21am UTC](https://forum.lulzbot.com/t/filament-feed-problem-clog/5642/8 "2018-02-21T02:21:17Z")

</div>

> [@](#):
>
> Yes, you can try to remove the broken nozzle threaded part. There are/were some guides/steps to follow using a screw extractor on the forum.

Found it: [Snapped the nozzle on my Taz 5 - #9 by gekke\_wolf](https://forum.lulzbot.com/t/snapped-the-nozzle-on-my-taz-5/4823/9)

---

_[View the full topic](https://forum.lulzbot.com/t/filament-feed-problem-clog/5642)._