# Flexion HT Extruder for Taz 6

**URL:** <https://forum.lulzbot.com/t/flexion-ht-extruder-for-taz-6/4198>\
**Category:** LulzBot TAZ\
**Created:** [November 11, 2016, 8:30pm UTC](https://forum.lulzbot.com/t/flexion-ht-extruder-for-taz-6/4198 "2016-11-11T20:30:43Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![doenute](https://avatars.discourse-cdn.com/v4/letter/d/958977/32.png) [@doenute](https://forum.lulzbot.com/u/doenute)\
**Post date:** [November 11, 2016, 8:30pm UTC](https://forum.lulzbot.com/t/flexion-ht-extruder-for-taz-6/4198/1 "2016-11-11T20:30:43Z")

</div>

I created a mount to easily allow the Flexion HT extruder to work on the Taz 6. Its now doing a nice job printing some Ninjaflex parts that I needed in my workplace. Have a look here if interested: [http://www.thingiverse.com/thing:1881058](http://www.thingiverse.com/thing:1881058)

Bill