Formfutura HDGlass

To others who might try it …

I have printed this in the black opaque version on the Mini, and tried different existing profiles to find a good match. PLA, High Temp PLA, PLA/PHA, nGen, T-Glaze, but ended up with XT colorfabb profile with glue, with adjusted temperature to 220C. It is rated at 205C to 225C.

Higher temperature 225C clogged the nozzle after each print, and 215C resulted in poor layer adhesion with parts too easy to split. 220C results in very strong parts with a small amount of hair as with other PETG type plastic. I have had one clogged nozzle in 10-15 prints, so maybe 218C is ideal.