# Fusion 360 Imbedded Slicer

**URL:** <https://forum.lulzbot.com/t/fusion-360-imbedded-slicer/21142>\
**Category:** Uncategorized\
**Created:** [March 24, 2020, 9:56pm UTC](https://forum.lulzbot.com/t/fusion-360-imbedded-slicer/21142 "2020-03-24T21:56:00Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Uptime](https://avatars.discourse-cdn.com/v4/letter/u/5fc32e/32.png) [@Uptime](https://forum.lulzbot.com/u/Uptime)\
**Post date:** [March 24, 2020, 9:56pm UTC](https://forum.lulzbot.com/t/fusion-360-imbedded-slicer/21142/1 "2020-03-24T21:56:00Z")

</div>

Has anyone been able to specify a “post processor” for use with Fusion 360?The software already supports several 3D printers, but Lulzbot printers are not yet included. I was able to specify the parameters for my TAZ 5, but I don’t know if one of the available post processors will work. (The MakerBot post processor doesn’t work.)

---

<div class="post-metadata">

**Author:** ![jgroeli](https://avatars.discourse-cdn.com/v4/letter/j/977dab/32.png) [@jgroeli](https://forum.lulzbot.com/u/jgroeli)\
**Post date:** [June 5, 2022, 6:49pm UTC](https://forum.lulzbot.com/t/fusion-360-imbedded-slicer/21142/2 "2022-06-05T18:49:50Z")

</div>

I found a Lulzbot post processor here, haven’t tried it yet though:

> **[Post Library for Autodesk Fusion 360 | Autodesk Fusion 360](https://cam.autodesk.com/hsmposts)**
>
> Autodesk Fusion CAM Solutions

---

<div class="post-metadata">

**Author:** ![GrillCheeseSandwich](https://avatars.discourse-cdn.com/v4/letter/g/b4bc9f/32.png) [@GrillCheeseSandwich](https://forum.lulzbot.com/u/GrillCheeseSandwich)\
**Post date:** [November 3, 2022, 6:48pm UTC](https://forum.lulzbot.com/t/fusion-360-imbedded-slicer/21142/3 "2022-11-03T18:48:11Z")

</div>

Any success with this?

 ![Screen Shot 2022-11-03 at 11.44.59 AM](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/c/c5c29482898b4a0af40d6e2a4ee5e2e31df10fda.jpeg)