# Fusion 360 Slicer Post Processing Setup

**URL:** <https://forum.lulzbot.com/t/fusion-360-slicer-post-processing-setup/24971>\
**Category:** Software\
**Created:** [November 3, 2022, 6:53pm UTC](https://forum.lulzbot.com/t/fusion-360-slicer-post-processing-setup/24971 "2022-11-03T18:53:51Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![GrillCheeseSandwich](https://avatars.discourse-cdn.com/v4/letter/g/b4bc9f/32.png) [@GrillCheeseSandwich](https://forum.lulzbot.com/u/GrillCheeseSandwich)\
**Post date:** [November 3, 2022, 6:53pm UTC](https://forum.lulzbot.com/t/fusion-360-slicer-post-processing-setup/24971/1 "2022-11-03T18:53:51Z")

</div>

Has anyone cracked the nut on how to set up your TAZ printer with Fusion 360? Are there any step by step instructions on how to get Fusion to Post process G-Code for a Lulzbot? See screenshot I feel like Im getting close.

 ![Screen Shot 2022-11-03 at 11.44.59 AM](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/c/c5c29482898b4a0af40d6e2a4ee5e2e31df10fda.jpeg)