# gcode experts

**URL:** <https://forum.lulzbot.com/t/gcode-experts/1513>\
**Category:** Software\
**Created:** [March 21, 2015, 2:24pm UTC](https://forum.lulzbot.com/t/gcode-experts/1513 "2015-03-21T14:24:28Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![Muggs](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/muggs/32/9237_2.png) [@Muggs](https://forum.lulzbot.com/u/Muggs)\
**Post date:** [March 21, 2015, 2:24pm UTC](https://forum.lulzbot.com/t/gcode-experts/1513/1 "2015-03-21T14:24:28Z")

</div>

Hello All,

I have something I would like to try, but what I’ve tried so far doesn’t work (no big surprise really).

If you look at the attached, I have tried:  
G1 X0 Y250  
M226  
and the head moves to X0 Y250 but no pause, it just moves right back and starts printing again.  
Has anyone tried doing this in gcode? Using KISSlicer BTW.  
Also, assuming I do get M226 to work, will sending another M226 resume printing? Is it like a toggle?  
 ![2015-03-21_10-08-04.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/5/57423c8b8335fdfecbe1abd9a56a0d2dd26a4bed.jpeg)

---

_[View the full topic](https://forum.lulzbot.com/t/gcode-experts/1513)._