# Great Print...except for... **URL:** \ **Category:** Hardware\ **Created:** [December 13, 2014, 8:16am UTC](https://forum.lulzbot.com/t/great-print-except-for/1064 "2014-12-13T08:16:57Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![JonathanB](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/jonathanb/32/39_2.png) [@JonathanB](https://forum.lulzbot.com/u/JonathanB)\ **Post date:** [December 13, 2014, 8:16am UTC](https://forum.lulzbot.com/t/great-print-except-for/1064/1 "2014-12-13T08:16:57Z")
Anyone have any idea what happened to this last part of the print? Otherwise these came out perfect. Not sure what happened on the tall piece, looks like it had a rough time. First guess would be speed too high for that small an area…??.. 4hr print. Slic3r and Prontr T:238 BT:110 Noz:.35 LH: .22 FLH: .3 Speed outside perm: 80 Speed inside perm:80 Speed fill: 80 Support: yes Shells:3 Material: Lulzbot ABS, enclosed chamber 40 Celcius ambient. ![20141213_025510.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/3/3158b8bb49a56e4f7acdf9bfaeec1fd54383efe8.jpeg) ![20141213_025443.jpg](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/4/49b96b6a3ce95c91cc0514f3cf95cb487a0cf246.jpeg) ---
**Author:** ![nopick](https://avatars.discourse-cdn.com/v4/letter/n/7bcc69/32.png) [@nopick](https://forum.lulzbot.com/u/nopick)\ **Post date:** [December 14, 2014, 12:03am UTC](https://forum.lulzbot.com/t/great-print-except-for/1064/2 "2014-12-14T00:03:07Z")
It looks like you needed a little cooling on the end. I am sure the layer times were pretty short. ---
**Author:** ![JonathanB](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/jonathanb/32/39_2.png) [@JonathanB](https://forum.lulzbot.com/u/JonathanB)\ **Post date:** [December 14, 2014, 12:35am UTC](https://forum.lulzbot.com/t/great-print-except-for/1064/3 "2014-12-14T00:35:07Z")
Yep, probably, it almost looks a little cooked.