# Ground up Restoration - TAZ3 to TAZ5

**URL:** <https://forum.lulzbot.com/t/ground-up-restoration-taz3-to-taz5/1900>\
**Category:** Hardware\
**Created:** [June 18, 2015, 5:08pm UTC](https://forum.lulzbot.com/t/ground-up-restoration-taz3-to-taz5/1900 "2015-06-18T17:08:01Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![CWAVE6K](https://avatars.discourse-cdn.com/v4/letter/c/a8b319/32.png) [@CWAVE6K](https://forum.lulzbot.com/u/CWAVE6K)\
**Post date:** [June 19, 2015, 9:57pm UTC](https://forum.lulzbot.com/t/ground-up-restoration-taz3-to-taz5/1900/12 "2015-06-19T21:57:00Z")

</div>

> [@Brent.I](#):
>
> If you are going to go with printed X ends, I recommend incorporating the X end Motor Mount and Idler mount. Chiphead designed an excellent pair, and was kind enough to post them [here](https://forum.lulzbot.com/t/taz-3-1-4-0-stiffened-x-ends/784/1)

I printed off the first one of these pieces last night and a heat retraction (what I suspect to be anyways) problem reared it’s ugly head. Kinda stumped on this one…

Posted a thread here [Problem SOLVED : Corners lifting on parts while printing](https://forum.lulzbot.com/t/problem-solved-corners-lifting-on-parts-while-printing/1903/1) In hopes for some sort of workable solution.

 ![](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/1/1fd6621cf61759709b94e463601b89c8e4394451.jpeg)

 ![](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/0/0b50def9024b50f2b4abfb252371beed77063803.jpeg)

 ![](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/0/074aa6bb1cf36fa94a1bc68fe815b7cf4971454b.jpeg)

---

_[View the full topic](https://forum.lulzbot.com/t/ground-up-restoration-taz3-to-taz5/1900)._