# Heating failed Taz Workhorse trouble at temps +200c **URL:** \ **Category:** Community\ **Created:** [January 3, 2025, 2:09am UTC](https://forum.lulzbot.com/t/heating-failed-taz-workhorse-trouble-at-temps-200c/27184 "2025-01-03T02:09:08Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![b-morgan](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/b-morgan/32/11517_2.png) [@b-morgan](https://forum.lulzbot.com/u/b-morgan)\ **Post date:** [January 3, 2025, 4:52pm UTC](https://forum.lulzbot.com/t/heating-failed-taz-workhorse-trouble-at-temps-200c/27184/2 "2025-01-03T16:52:35Z")
Since you have OctoPrint I’d suggest that we try an experiment or two before replacing any parts. First, let’s take a look at the temperature graph as you use the Target controls to heat the Tool to 220 degrees (the built-in ABS value). While you are waiting to things to heat up, here’s a couple of topics to read: [https://forum.lulzbot.com/t/taz-5-e1-err-maxtemp-printer-halted-please-reset/26987/5](https://forum.lulzbot.com/t/taz-5-e1-err-maxtemp-printer-halted-please-reset/26987/5) [https://forum.lulzbot.com/t/taz-5-extruder-not-reaching-set-temp/21657/18](https://forum.lulzbot.com/t/taz-5-extruder-not-reaching-set-temp/21657/18) After viewing the results of this experiment, we may want to consider a PID tune. In the first topic above, I linked an article and in the second topic above, there is a link to a video. Here’s what I’m looking for: ![image](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/6/6c3d86fd5cc29232539727eb89adb0d89855e83d.png) --- _[View the full topic](https://forum.lulzbot.com/t/heating-failed-taz-workhorse-trouble-at-temps-200c/27184)._