# Het there guys needing some help

**URL:** <https://forum.lulzbot.com/t/het-there-guys-needing-some-help/23031>\
**Category:** Uncategorized\
**Created:** [February 25, 2021, 4:30pm UTC](https://forum.lulzbot.com/t/het-there-guys-needing-some-help/23031 "2021-02-25T16:30:43Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![slawson12](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/slawson12/32/11141_2.png) [@slawson12](https://forum.lulzbot.com/u/slawson12)\
**Post date:** [February 25, 2021, 4:30pm UTC](https://forum.lulzbot.com/t/het-there-guys-needing-some-help/23031/1 "2021-02-25T16:30:43Z")

</div>

Just got my Taz 6 with a dual extruder v3…

I’m having a few issues.

1. is this tool head play normal? [lulzbot Taz 6 dual tool head play - YouTube](https://www.youtube.com/watch?v=c8Xq0OjNBY0)

2. The hot ends keep heat creeping regardless of my retraction settings… is there a fix?

---

<div class="post-metadata">

**Author:** ![b-morgan](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/b-morgan/32/11517_2.png) [@b-morgan](https://forum.lulzbot.com/u/b-morgan)\
**Post date:** [February 28, 2021, 5:23pm UTC](https://forum.lulzbot.com/t/het-there-guys-needing-some-help/23031/2 "2021-02-28T17:23:16Z")

</div>

1. That play isn’t normal. You may need to do some “fine tuning” of the bottom of the tool head back plate.

2. There are a couple of fixes for the heat creep. I’m assuming you have a Dual Extruder V3 and if so, the [V3.1 conversion kit](https://shop.lulzbot.com/dual-v3-to-v3-1-hardware-conversion-kit-kt-hd0023?ref=KT-HD0023) should help but I prefer [this one](https://www.thingiverse.com/thing:3213878). With care, you can use the stock fan without cutting the wires. There are also higher CFM 40mm 5v fans available from Noctua (NF-A4x10 5V and NF-A4x20 5V).

If you want to really get carried away, [https://www.thingiverse.com/thing:3098955](https://www.thingiverse.com/thing:3098955) or [https://forum.lulzbot.com/t/duel-v3-heat-creep-fix/6881](https://forum.lulzbot.com/t/duel-v3-heat-creep-fix/6881)

---

<div class="post-metadata">

**Author:** ![slawson12](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/slawson12/32/11141_2.png) [@slawson12](https://forum.lulzbot.com/u/slawson12)\
**Post date:** [March 3, 2021, 1:26pm UTC](https://forum.lulzbot.com/t/het-there-guys-needing-some-help/23031/3 "2021-03-03T13:26:32Z")

</div>

![20210303_013046](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/2/29967df8ca0b0f94fa9bb533b14ac3abbcdf07d5.jpeg)

Printed and installed!

Discovered some z banding found a bent lead screw, removed the bearings and got a way better print.

Changed out the tool head bottom mount holder and head no longer wobbles!

Ty