# Homing issues causing z button to not get pressed or activated

**URL:** <https://forum.lulzbot.com/t/homing-issues-causing-z-button-to-not-get-pressed-or-activated/21172>\
**Category:** LulzBot TAZ\
**Created:** [March 28, 2020, 11:36pm UTC](https://forum.lulzbot.com/t/homing-issues-causing-z-button-to-not-get-pressed-or-activated/21172 "2020-03-28T23:36:16Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![chriskelly13](https://avatars.discourse-cdn.com/v4/letter/c/7c8e57/32.png) [@chriskelly13](https://forum.lulzbot.com/u/chriskelly13)\
**Post date:** [March 28, 2020, 11:36pm UTC](https://forum.lulzbot.com/t/homing-issues-causing-z-button-to-not-get-pressed-or-activated/21172/1 "2020-03-28T23:36:16Z")

</div>

I ham having an issue homing, seems like offsets or safe home locations, I have tried flashing firmware to see if this solves issue but no joy. I only used the printer the other day too.  
[error video](https://drive.google.com/file/d/14hbjoTjH7PI6kDAvUfTbwDFCunc74ElS/view?usp=sharing)