# How do you pause at layer?? TAZ 6 with micro extruder

**URL:** <https://forum.lulzbot.com/t/how-do-you-pause-at-layer-taz-6-with-micro-extruder/6909>\
**Category:** Software\
**Created:** [September 19, 2019, 3:48pm UTC](https://forum.lulzbot.com/t/how-do-you-pause-at-layer-taz-6-with-micro-extruder/6909 "2019-09-19T15:48:51Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![alicenrhodes](https://avatars.discourse-cdn.com/v4/letter/a/b487fb/32.png) [@alicenrhodes](https://forum.lulzbot.com/u/alicenrhodes)\
**Post date:** [September 19, 2019, 3:48pm UTC](https://forum.lulzbot.com/t/how-do-you-pause-at-layer-taz-6-with-micro-extruder/6909/1 "2019-09-19T15:48:51Z")

</div>

I am using the 3.6.18 version of Cura for Lulzbot. I am having a hard time getting it to pause at a certain layer. None of the codes work that are loaded in the program. I used to use 21.04 and had a plugin to pause at layer. I could pause it a certain layer to change the filament, and it didn’t have a time limit set, I just changed the filament whenever I got to it, then resumed with a new color. Please help!!!

---

<div class="post-metadata">

**Author:** ![fivewaters](https://avatars.discourse-cdn.com/v4/letter/f/9fc348/32.png) [@fivewaters](https://forum.lulzbot.com/u/fivewaters)\
**Post date:** [October 18, 2019, 8:50am UTC](https://forum.lulzbot.com/t/how-do-you-pause-at-layer-taz-6-with-micro-extruder/6909/2 "2019-10-18T08:50:17Z")

</div>

The Pause at Layer funciton is in your current version of Cura.

At the top of your window, cllick on Extensions --\> Post Processing --\> Modify G-code  
Click on Add Script and select Pause at Layer or Height.