# Hundreds of Print Profiles on TAZ 6?

**URL:** <https://forum.lulzbot.com/t/hundreds-of-print-profiles-on-taz-6/3391>\
**Category:** LulzBot TAZ\
**Created:** [May 3, 2016, 8:00pm UTC](https://forum.lulzbot.com/t/hundreds-of-print-profiles-on-taz-6/3391 "2016-05-03T20:00:36Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![AverageVeganDude](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/averagevegandude/32/9334_2.png) [@AverageVeganDude](https://forum.lulzbot.com/u/AverageVeganDude)\
**Post date:** [May 3, 2016, 8:00pm UTC](https://forum.lulzbot.com/t/hundreds-of-print-profiles-on-taz-6/3391/1 "2016-05-03T20:00:36Z")

</div>

How is this possible? Is this in Cura or Marlin? Can you put this on a TAZ 5?

Where do I get this upgrade does anyone know 🙂

Thanks,  
Chris

---

<div class="post-metadata">

**Author:** ![Orias](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/orias/32/3_2.png) [@Orias](https://forum.lulzbot.com/u/Orias)\
**Post date:** [May 3, 2016, 9:56pm UTC](https://forum.lulzbot.com/t/hundreds-of-print-profiles-on-taz-6/3391/2 "2016-05-03T21:56:13Z")

</div>

The print profiles are built into [Cura LulzBot Edition](https://lulzbot.com/cura). That version of Cura supports three different LulzBot 3D printers, with potentially 14 different printer:tool head permutations, with [30 different filaments](https://www.lulzbot.com/store/filament), each of which has at least one different Quickprint profile.

To get the latest tested Quickprint profiles update Cura by checking [LulzBot.com/Cura](http://lulzbot.com/cura).

If you’d like to see what goes into our profiles, they can be found here: [https://code.alephobjects.com/diffusion/P/browse/master/](https://code.alephobjects.com/diffusion/P/browse/master/) and [https://code.alephobjects.com/diffusion/P/browse/experimental/](https://code.alephobjects.com/diffusion/P/browse/experimental/)

---

<div class="post-metadata">

**Author:** ![jebba](https://avatars.discourse-cdn.com/v4/letter/j/9e8a1a/32.png) [@jebba](https://forum.lulzbot.com/u/jebba)\
**Post date:** [May 3, 2016, 10:17pm UTC](https://forum.lulzbot.com/t/hundreds-of-print-profiles-on-taz-6/3391/3 "2016-05-03T22:17:31Z")

</div>

These are all the profiles for all LulzBot printers in Cura. So it includes older machines and multiple profiles for various materials (e.g. ABS has three profiles). In sum:

```nohighlight
/usr/share/cura/resources/quickprint/lulzbot_profiles$ find . -type f | wc -l
297

```

---

<div class="post-metadata">

**Author:** ![AverageVeganDude](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/averagevegandude/32/9334_2.png) [@AverageVeganDude](https://forum.lulzbot.com/u/AverageVeganDude)\
**Post date:** [May 4, 2016, 4:01am UTC](https://forum.lulzbot.com/t/hundreds-of-print-profiles-on-taz-6/3391/4 "2016-05-04T04:01:07Z")

</div>

Is Cura v19 just for the new TAZ 6? or can I install it to use with my Taz 5?

Thanks,  
Chris

---

<div class="post-metadata">

**Author:** ![PdxSteve](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/pdxsteve/32/9403_2.png) [@PdxSteve](https://forum.lulzbot.com/u/PdxSteve)\
**Post date:** [May 4, 2016, 4:12am UTC](https://forum.lulzbot.com/t/hundreds-of-print-profiles-on-taz-6/3391/5 "2016-05-04T04:12:45Z")

</div>

> [@AverageVeganDude](#):
>
> Is Cura v19 just for the new TAZ 6? or can I install it to use with my Taz 5?
> 
> Thanks,  
> Chris

It’s for all models, and non-lulzbot printers too… [LulzBot | Cura](https://www.lulzbot.com/cura)