# LCD Housing Drawings and Dimensions

**URL:** <https://forum.lulzbot.com/t/lcd-housing-drawings-and-dimensions/800>\
**Category:** LulzBot TAZ\
**Created:** [August 28, 2014, 4:46pm UTC](https://forum.lulzbot.com/t/lcd-housing-drawings-and-dimensions/800 "2014-08-28T16:46:19Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Scuttlebot](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/scuttlebot/32/30_2.png) [@Scuttlebot](https://forum.lulzbot.com/u/Scuttlebot)\
**Post date:** [August 28, 2014, 4:46pm UTC](https://forum.lulzbot.com/t/lcd-housing-drawings-and-dimensions/800/1 "2014-08-28T16:46:19Z")

</div>

Can someone point me in the direction of the drawings/schematic for the LCD housing on the TAZ 4?

I’d like to design a Raspberry Pi case that mounts to M3 threaded holes on the back and would like to get the dimensions for the spacing of the threaded holes.

Thanks!

---

<div class="post-metadata">

**Author:** ![Orias](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/orias/32/3_2.png) [@Orias](https://forum.lulzbot.com/u/Orias)\
**Post date:** [August 28, 2014, 8:56pm UTC](https://forum.lulzbot.com/t/lcd-housing-drawings-and-dimensions/800/2 "2014-08-28T20:56:34Z")

</div>

Here’s the back of the case: [http://download.lulzbot.com/TAZ/4.0/production\_parts/Electronics/Case\_drawings/LCD\_cover\_back.PDF](http://download.lulzbot.com/TAZ/4.0/production_parts/Electronics/Case_drawings/LCD_cover_back.PDF)

and the front: [http://download.lulzbot.com/TAZ/4.0/production\_parts/Electronics/Case\_drawings/LCD\_cover\_front.PDF](http://download.lulzbot.com/TAZ/4.0/production_parts/Electronics/Case_drawings/LCD_cover_front.PDF)

Even more goodness: [http://download.lulzbot.com/TAZ/4.0/production\_parts/](http://download.lulzbot.com/TAZ/4.0/production_parts/)

---

<div class="post-metadata">

**Author:** ![Scuttlebot](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/scuttlebot/32/30_2.png) [@Scuttlebot](https://forum.lulzbot.com/u/Scuttlebot)\
**Post date:** [August 28, 2014, 10:48pm UTC](https://forum.lulzbot.com/t/lcd-housing-drawings-and-dimensions/800/3 "2014-08-28T22:48:48Z")

</div>

Excellent, thanks!

I’ll make my efforts public and post them here once I get something together. I want to mount my new model B+ back there that runs octoprint. Seems like a good place for it.