# Looking for a TAZ5 owner in the Netherlands

**URL:** <https://forum.lulzbot.com/t/looking-for-a-taz5-owner-in-the-netherlands/1926>\
**Category:** Hardware\
**Created:** [June 26, 2015, 1:30pm UTC](https://forum.lulzbot.com/t/looking-for-a-taz5-owner-in-the-netherlands/1926 "2015-06-26T13:30:29Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Doodle3D](https://avatars.discourse-cdn.com/v4/letter/d/c0e974/32.png) [@Doodle3D](https://forum.lulzbot.com/u/Doodle3D)\
**Post date:** [June 26, 2015, 1:30pm UTC](https://forum.lulzbot.com/t/looking-for-a-taz5-owner-in-the-netherlands/1926/1 "2015-06-26T13:30:29Z")

</div>

Hi,

One of our Doodle3D WiFi-Box owners has some issues connecting his box with the TAZ5. We are trying to figure out what the issue is, but we need access to a local TAZ5 printer to debug (we succesfully tested with a TAZ4 previously).

As Lulzbot does not seem to have Netherlands-based resellers we could contact, we are looking for a Dutch individual who owns this machine.

Is there anyone here who would be willing to lend us their machine for one or more days? We are located in the city of Utrecht.

Thanks for your time.

Kind regards.  
Nico van Dijk  
Doodle3D

---

<div class="post-metadata">

**Author:** ![piercet](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/piercet/32/12_2.png) [@piercet](https://forum.lulzbot.com/u/piercet)\
**Post date:** [June 26, 2015, 2:06pm UTC](https://forum.lulzbot.com/t/looking-for-a-taz5-owner-in-the-netherlands/1926/2 "2015-06-26T14:06:08Z")

</div>

The only differences between the Taz 4 and the Taz 5 electronics and firmware is the different hotend. Its the same Ultimachine Rambo board [https://ultimachine.com/content/new-rambo-3d-printer-electronics-ultimachine](https://ultimachine.com/content/new-rambo-3d-printer-electronics-ultimachine) . If you can’t find a 5, you could build a 5 style hotend for a 4, then flash the board to the 5 firmware and try that.