# Lulzbot cura exporting all gcodes to 10mm by 10mm by 10mm

**URL:** <https://forum.lulzbot.com/t/lulzbot-cura-exporting-all-gcodes-to-10mm-by-10mm-by-10mm/25233>\
**Category:** Software\
**Created:** [January 10, 2023, 8:33pm UTC](https://forum.lulzbot.com/t/lulzbot-cura-exporting-all-gcodes-to-10mm-by-10mm-by-10mm/25233 "2023-01-10T20:33:21Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![elextron](https://avatars.discourse-cdn.com/v4/letter/e/a9adbd/32.png) [@elextron](https://forum.lulzbot.com/u/elextron)\
**Post date:** [January 10, 2023, 8:33pm UTC](https://forum.lulzbot.com/t/lulzbot-cura-exporting-all-gcodes-to-10mm-by-10mm-by-10mm/25233/1 "2023-01-10T20:33:21Z")

</div>

so, i recently fixed my older taz 5 (several plastic parts broke) the first print i exported using cura exported with the proper bed dimensions, but every file after that has exported as if the bed size was 10 by 10 by 10 mm-i’m very lost, i’ve tried to fiddle with the code as much as i can, but i do not know much about code. what do i do to make sure the dimensions stay correct when exporting it to gcode and saving it on an sd drive? the stl files are the right size, but when i upload the gcode back into cura to check, it says 10 by 10 by 10, and every print is messed up…thanks!

---

<div class="post-metadata">

**Author:** ![b-morgan](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/b-morgan/32/11517_2.png) [@b-morgan](https://forum.lulzbot.com/u/b-morgan)\
**Post date:** [January 11, 2023, 12:47pm UTC](https://forum.lulzbot.com/t/lulzbot-cura-exporting-all-gcodes-to-10mm-by-10mm-by-10mm/25233/2 "2023-01-11T12:47:59Z")

</div>

Please tell us more about your slicer. What version? What OS is it installed on?

Please attempt to slice a small object like a 15x15x15mm cube and upload both the .stl file and the .gcode file.

The more details you give us, the better chance we have of helping you.