# Lulzbot Mini 1 nozzle part replacement **URL:** \ **Category:** Community\ **Created:** [April 24, 2026, 12:04am UTC](https://forum.lulzbot.com/t/lulzbot-mini-1-nozzle-part-replacement/27894 "2026-04-24T00:04:03Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Eddieg](https://avatars.discourse-cdn.com/v4/letter/e/e47c2d/32.png) [@Eddieg](https://forum.lulzbot.com/u/Eddieg)\ **Post date:** [April 24, 2026, 12:04am UTC](https://forum.lulzbot.com/t/lulzbot-mini-1-nozzle-part-replacement/27894/1 "2026-04-24T00:04:03Z")
Hi guys. I have a Lulzbot mini 1 in 2026 and I need to find a nozzle replacement. I am new in 3 D print and I would like to know where can I find a replacement. with the correct specs. Any help is appreciated. Thanks ---
**Author:** ![Wrathernaut](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/wrathernaut/32/13542_2.png) [@Wrathernaut](https://forum.lulzbot.com/u/Wrathernaut)\ **Post date:** [April 24, 2026, 2:18pm UTC](https://forum.lulzbot.com/t/lulzbot-mini-1-nozzle-part-replacement/27894/2 "2026-04-24T14:18:42Z")
What toolhead is on your mini 1? Likely ones are Mini Print Head, Mini Aerostruder, Mini 1.04 Extruder, or HS, SE, or other newer-style Titan-Aero based extruders. Refer to the assembly instruction site for pictures of each one - [OHAI: Open Hardware Assembly Instructions](https://ohai.lulzbot.com/group/hot-end-tool-head-assembly/) ---
**Author:** ![anneg](https://avatars.discourse-cdn.com/v4/letter/a/dc4da7/32.png) [@anneg](https://forum.lulzbot.com/u/anneg)\ **Post date:** [April 30, 2026, 9:55pm UTC](https://forum.lulzbot.com/t/lulzbot-mini-1-nozzle-part-replacement/27894/3 "2026-04-30T21:55:47Z")
I just ordered nozzles for our mini 1.04 machines. This is from support when I asked him to let me know what I should order. " | | | --- | \*\* Eric Gabriel\*\* (LulzBot) Feb 24, 2026, 11:09 AM CST Hello Anne. We don’t sell a direct replacement for that nozzle but this one is compatible. [https://buy.lulzbot.com/products/spare-nickel-plated-brass-nozzle-2-85mm-x-0-5mm](https://buy.lulzbot.com/products/spare-nickel-plated-brass-nozzle-2-85mm-x-0-5mm "https://buy.lulzbot.com/products/spare-nickel-plated-brass-nozzle-2-85mm-x-0-5mm") This is the closest thing that you will find for a Hexagon nozzle replacement: [https://store.micro-swiss.com/collections/lulzbot/products/lulzbot-m6-3mm-filament-hexagon?variant=19421418883](https://store.micro-swiss.com/collections/lulzbot/products/lulzbot-m6-3mm-filament-hexagon?variant=19421418883 "https://store.micro-swiss.com/collections/lulzbot/products/lulzbot-m6-3mm-filament-hexagon?variant=19421418883") We use Micro-Swiss nozzles as well and can confirm their quality." ---
**Author:** ![Eddieg](https://avatars.discourse-cdn.com/v4/letter/e/e47c2d/32.png) [@Eddieg](https://forum.lulzbot.com/u/Eddieg)\ **Post date:** [April 30, 2026, 10:47pm UTC](https://forum.lulzbot.com/t/lulzbot-mini-1-nozzle-part-replacement/27894/4 "2026-04-30T22:47:10Z")
Thank you for your help. I checked the link and the thread in that replacement says M6. Is that the correct one?. I read in the internet before and it said M5. Did you put already in your Mini 1? and no leaks? ---
**Author:** ![anneg](https://avatars.discourse-cdn.com/v4/letter/a/dc4da7/32.png) [@anneg](https://forum.lulzbot.com/u/anneg)\ **Post date:** [May 1, 2026, 5:15pm UTC](https://forum.lulzbot.com/t/lulzbot-mini-1-nozzle-part-replacement/27894/5 "2026-05-01T17:15:52Z")
I’m not sure where you read that Lulzbot uses m5 threaded nozzles. That’s not correct. I haven’t installed them yet as I have other troubleshooting to do on the print farm before I do nozzle changes. ---
**Author:** ![Eddieg](https://avatars.discourse-cdn.com/v4/letter/e/e47c2d/32.png) [@Eddieg](https://forum.lulzbot.com/u/Eddieg)\ **Post date:** [May 6, 2026, 12:26am UTC](https://forum.lulzbot.com/t/lulzbot-mini-1-nozzle-part-replacement/27894/6 "2026-05-06T00:26:24Z")
You are right. It is M6. I am gonna order and replace it. It was working well and all sudden started stop working close to the end of the printings just at the same part in each printing. I used a needle to unclog the nozzle and suddenly stop working.