# Lulzbot mini 2 leveling problem

**URL:** <https://forum.lulzbot.com/t/lulzbot-mini-2-leveling-problem/7076>\
**Category:** Hardware\
**Created:** [December 2, 2019, 10:46am UTC](https://forum.lulzbot.com/t/lulzbot-mini-2-leveling-problem/7076 "2019-12-02T10:46:59Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![434sulaiman](https://avatars.discourse-cdn.com/v4/letter/4/87869e/32.png) [@434sulaiman](https://forum.lulzbot.com/u/434sulaiman)\
**Post date:** [December 2, 2019, 10:46am UTC](https://forum.lulzbot.com/t/lulzbot-mini-2-leveling-problem/7076/1 "2019-12-02T10:46:59Z")

</div>

Hello,

The extruder on my lulzbot mini 2 does not touch the washer, thus cannot print.

Please watch the video on YouTube:

[https://youtu.be/PyxPwvZ-Dx8](https://youtu.be/PyxPwvZ-Dx8)

I updated the software and played alot with the settings but nothing changed

---

<div class="post-metadata">

**Author:** ![Mjrosyxa](https://avatars.discourse-cdn.com/v4/letter/m/e5b9ba/32.png) [@Mjrosyxa](https://forum.lulzbot.com/u/Mjrosyxa)\
**Post date:** [December 9, 2019, 9:20pm UTC](https://forum.lulzbot.com/t/lulzbot-mini-2-leveling-problem/7076/2 "2019-12-09T21:20:12Z")

</div>

Make sure the machine is running the proper firmware for the extruder being used and model of machine. It looks like when it’s running the leveling squence it doesn’t move over far enough, the setting for that are in the firmware.