# Lulzbot Mini Bed Spring

**URL:** <https://forum.lulzbot.com/t/lulzbot-mini-bed-spring/7004>\
**Category:** Hardware\
**Created:** [November 5, 2019, 1:25am UTC](https://forum.lulzbot.com/t/lulzbot-mini-bed-spring/7004 "2019-11-05T01:25:54Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![BlueRobotShoes](https://avatars.discourse-cdn.com/v4/letter/b/58956e/32.png) [@BlueRobotShoes](https://forum.lulzbot.com/u/BlueRobotShoes)\
**Post date:** [November 5, 2019, 1:25am UTC](https://forum.lulzbot.com/t/lulzbot-mini-bed-spring/7004/1 "2019-11-05T01:25:54Z")

</div>

The Mini is a good printer but getting support for it is incredibly difficult especially when trying to solve a problem. Right now my bed slanting issue still exists so I want to try to fix the problem myself which will help me understand the hardware even more.

The idea I have is to redesign the corner bed piece so I can use springs to help level the bed properly similar to the Taz4. The main question I have is if the steel spacer is necessary to make the connection to the build plate when probing? Is the screw touching the plate assembly enough?

---

<div class="post-metadata">

**Author:** ![fivewaters](https://avatars.discourse-cdn.com/v4/letter/f/9fc348/32.png) [@fivewaters](https://forum.lulzbot.com/u/fivewaters)\
**Post date:** [November 8, 2019, 8:17pm UTC](https://forum.lulzbot.com/t/lulzbot-mini-bed-spring/7004/2 "2019-11-08T20:17:31Z")

</div>

The spacer has to make the connection.