# Lulzbot Mini Modular Heated Bed Corner STLs
**URL:** https://forum.lulzbot.com/t/lulzbot-mini-modular-heated-bed-corner-stls/20826
**Category:** LulzBot Mini
**Created:** [February 18, 2020, 11:14am UTC](https://forum.lulzbot.com/t/lulzbot-mini-modular-heated-bed-corner-stls/20826 "2020-02-18T11:14:45Z")
**Posts on this page:** 4
**Page:** 1
### Author:  [@mvirks](https://forum.lulzbot.com/u/mvirks)
#### Post date: [February 18, 2020, 11:14am UTC](https://forum.lulzbot.com/t/lulzbot-mini-modular-heated-bed-corner-stls/20826/1 "2020-02-18T11:14:45Z")
I need to print replacement bed corners for my Mini’s modular print bed.
But [download.lulzbot.com](http://download.lulzbot.com) only has the STLs for the thin corners that came with the printer - the modular bed upgrade requires larger ones.
Has anyone here got an STL for the modular version? Am looking for the rounded corners for the earlier Mini models.
---
### Author:  [@Iggy](https://forum.lulzbot.com/u/Iggy)
#### Post date: [February 18, 2020, 2:42pm UTC](https://forum.lulzbot.com/t/lulzbot-mini-modular-heated-bed-corner-stls/20826/2 "2020-02-18T14:42:42Z")
Here you go:
[http://download.lulzbot.com/Mini/2.0.6/production\_parts/printed\_parts/bed\_corner/](http://download.lulzbot.com/Mini/2.0.6/production_parts/printed_parts/bed_corner/)
They are for the Mini 2 but it uses the modular bed.
I should also ask which mini are you running? 1.03 and below or 1.04?
---
### Author:  [@mvirks](https://forum.lulzbot.com/u/mvirks)
#### Post date: [February 18, 2020, 3:21pm UTC](https://forum.lulzbot.com/t/lulzbot-mini-modular-heated-bed-corner-stls/20826/3 "2020-02-18T15:21:39Z")
I’m using the 1.3. And the only ones in the 1.3 and 1.4 sections are the pre-modular bed ones. The ones that come with the modular bed are significantly higher.
---
### Author:  [@Iggy](https://forum.lulzbot.com/u/Iggy)
#### Post date: [February 18, 2020, 6:17pm UTC](https://forum.lulzbot.com/t/lulzbot-mini-modular-heated-bed-corner-stls/20826/4 "2020-02-18T18:17:42Z")
Ok I was worries about that. I can’t find the 1.03 feet either. I’m trying to find a 1.04 bed mount myself to update one of my Minis. I really done like those older beds.