# Lulzbot Mini USB Support

**URL:** <https://forum.lulzbot.com/t/lulzbot-mini-usb-support/3690>\
**Category:** LulzBot Mini\
**Created:** [July 5, 2016, 9:17pm UTC](https://forum.lulzbot.com/t/lulzbot-mini-usb-support/3690 "2016-07-05T21:17:33Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![jkrokowski](https://avatars.discourse-cdn.com/v4/letter/j/0ea827/32.png) [@jkrokowski](https://forum.lulzbot.com/u/jkrokowski)\
**Post date:** [July 5, 2016, 9:17pm UTC](https://forum.lulzbot.com/t/lulzbot-mini-usb-support/3690/1 "2016-07-05T21:17:33Z")

</div>

After seeing a broken USB port on a Mini, we did a little design and came up with this USB support (so that solder is not also acting as a mechanical joint).

The whole idea is print one out, snap it into the opening for the USB port on the mini-RAMBO and it helps prevent the USB port from breaking off. Enjoy!  
 ![DSC_3741.JPG](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/b/bd28eafb1382cab197cfbf28d05f8a43d3edad57.jpeg)  
 ![DSC_3744.JPG](https://us1.discourse-cdn.com/flex020/uploads/lulzbot/original/2X/b/b63734a1505c54bbe1b809c2e91f5f43db551c4d.jpeg)  
(More improvements likely to come)  
[usb\_support\_mini.fcstd](https://forum.lulzbot.com/uploads/short-url/qKbR10hbYratZ1xbu2VPtbUYaNY.fcstd) (25.5 KB)  
[usb\_support\_mini\_v1.stl](https://forum.lulzbot.com/uploads/short-url/cts8P2X3Bpda8IgXO7plsc3ZBBg.stl) (3.4 KB)

---

_[View the full topic](https://forum.lulzbot.com/t/lulzbot-mini-usb-support/3690)._