# LulzBot SideKick 747 bed leveling

**URL:** <https://forum.lulzbot.com/t/lulzbot-sidekick-747-bed-leveling/26963>\
**Category:** Hardware\
**Created:** [September 8, 2024, 6:35pm UTC](https://forum.lulzbot.com/t/lulzbot-sidekick-747-bed-leveling/26963 "2024-09-08T18:35:09Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Reginald](https://avatars.discourse-cdn.com/v4/letter/r/9dc877/32.png) [@Reginald](https://forum.lulzbot.com/u/Reginald)\
**Post date:** [September 8, 2024, 6:35pm UTC](https://forum.lulzbot.com/t/lulzbot-sidekick-747-bed-leveling/26963/1 "2024-09-08T18:35:09Z")

</div>

Bed leveling on my SideKick is occurring on the front half of bed. Should it be around the center of the bed? The initial touch down when starting a print is center side to side but 1/3 from the front.