# Lulzbot taz 6 and Simplify 3D **URL:** \ **Category:** Software\ **Created:** [July 26, 2016, 7:54pm UTC](https://forum.lulzbot.com/t/lulzbot-taz-6-and-simplify-3d/3775 "2016-07-26T19:54:23Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![rollseboy](https://avatars.discourse-cdn.com/v4/letter/r/85f322/32.png) [@rollseboy](https://forum.lulzbot.com/u/rollseboy)\ **Post date:** [July 26, 2016, 7:54pm UTC](https://forum.lulzbot.com/t/lulzbot-taz-6-and-simplify-3d/3775/1 "2016-07-26T19:54:23Z")
Hi everyone ive just got simplify 3d to use for my taz 6. with it do i have to add the code in for the auto levelling or is that a preset in Simplify 3D? ---
**Author:** ![ttabbal](https://avatars.discourse-cdn.com/v4/letter/t/db5fbb/32.png) [@ttabbal](https://forum.lulzbot.com/u/ttabbal)\ **Post date:** [July 26, 2016, 8:35pm UTC](https://forum.lulzbot.com/t/lulzbot-taz-6-and-simplify-3d/3775/2 "2016-07-26T20:35:54Z")
I’m using a Mini. The built in profile did do auto-leveling, and generally worked alright. However, I copy/pasted the start/end scripts from Cura as I wanted it to always be the same regardless of which slicer I decided to use. The biggest change was the end script. The bit where it cools and then pushes the build plate out wasn’t in the default S3D profile when I got it about 6 months ago. ---
**Author:** ![martinbogo](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/martinbogo/32/9280_2.png) [@martinbogo](https://forum.lulzbot.com/u/martinbogo)\ **Post date:** [August 1, 2016, 5:17pm UTC](https://forum.lulzbot.com/t/lulzbot-taz-6-and-simplify-3d/3775/3 "2016-08-01T17:17:43Z")
Hi there ttabbal, The latest edition of S3D has a profile for the TAZ 6 that works well. In case you need it, I am attaching my FFF file. [LulzBot TAZ 6 Single.fff.zip](https://forum.lulzbot.com/uploads/short-url/8fibLuAqbFCB5aHzRpTnfdzXYMP.zip) (3.43 KB) Happy printing! -Martin