# LulzBot TAZ 6 prints coming out extremely messy and hairy and wont come off build plate

**URL:** <https://forum.lulzbot.com/t/lulzbot-taz-6-prints-coming-out-extremely-messy-and-hairy-and-wont-come-off-build-plate/26667>\
**Category:** Hardware\
**Created:** [May 15, 2024, 4:10pm UTC](https://forum.lulzbot.com/t/lulzbot-taz-6-prints-coming-out-extremely-messy-and-hairy-and-wont-come-off-build-plate/26667 "2024-05-15T16:10:04Z")\
**Posts on this page:** 1\
**Page:** 2

<div class="post-metadata">

**Author:** ![TimPostma](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/timpostma/32/12492_2.png) [@TimPostma](https://forum.lulzbot.com/u/TimPostma)\
**Post date:** [August 20, 2024, 10:04pm UTC](https://forum.lulzbot.com/t/lulzbot-taz-6-prints-coming-out-extremely-messy-and-hairy-and-wont-come-off-build-plate/26667/21 "2024-08-20T22:04:22Z")

</div>

I was also curious on the temperature & which filament is being used as well as the speeds

[Previous page](https://forum.lulzbot.com/t/lulzbot-taz-6-prints-coming-out-extremely-messy-and-hairy-and-wont-come-off-build-plate/26667.md?page=1)