# LuLzBot Taz Workhorse

**URL:** <https://forum.lulzbot.com/t/lulzbot-taz-workhorse/27814>\
**Category:** Print Advice\
**Created:** [December 19, 2025, 4:00pm UTC](https://forum.lulzbot.com/t/lulzbot-taz-workhorse/27814 "2025-12-19T16:00:46Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![pbhatia](https://avatars.discourse-cdn.com/v4/letter/p/3d9bf3/32.png) [@pbhatia](https://forum.lulzbot.com/u/pbhatia)\
**Post date:** [December 19, 2025, 4:00pm UTC](https://forum.lulzbot.com/t/lulzbot-taz-workhorse/27814/1 "2025-12-19T16:00:46Z")

</div>

Hello all, I’m new to 3D printing and working with a LulzBot TAZ Workhorse. My issue is that the printer completes only one print job and then stops, with no filament extrusion afterward. I’ve tried changing the filament, but it still doesn’t purge or continue printing. Any advice or solutions would be appreciated.

---

<div class="post-metadata">

**Author:** ![Wrathernaut](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/wrathernaut/32/13542_2.png) [@Wrathernaut](https://forum.lulzbot.com/u/Wrathernaut)\
**Post date:** [December 19, 2025, 8:13pm UTC](https://forum.lulzbot.com/t/lulzbot-taz-workhorse/27814/2 "2025-12-19T20:13:52Z")

</div>

I’m not really sure what you’re expecting it to do after it’s complete.

It completes a job, then you have to clear the plate, and start the next one.