# Lulzbot TAZ6 FlexyDually v2 with PVA

**URL:** <https://forum.lulzbot.com/t/lulzbot-taz6-flexydually-v2-with-pva/6145>\
**Category:** Hardware\
**Created:** [September 4, 2018, 1:32am UTC](https://forum.lulzbot.com/t/lulzbot-taz6-flexydually-v2-with-pva/6145 "2018-09-04T01:32:34Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![noyeitan](https://avatars.discourse-cdn.com/v4/letter/n/f1d935/32.png) [@noyeitan](https://forum.lulzbot.com/u/noyeitan)\
**Post date:** [September 4, 2018, 1:32am UTC](https://forum.lulzbot.com/t/lulzbot-taz6-flexydually-v2-with-pva/6145/1 "2018-09-04T01:32:34Z")

</div>

Hello,  
Based on everything I’ve read and based on lulzbot website for supported profiles ([https://www.lulzbot.com/taz-6-cura-profiles](https://www.lulzbot.com/taz-6-cura-profiles)) for the FlexyDually v2 head, I should be able to print with rigid filament in head #1 and PVA in head #2.  
I’m using the latest version of the curaLE (3.2.23) but there is no material/profile for the FlexyDually v2 for PVA. I’ve tried multiple things without success yet (download profile from lulzbot profiles website, copy/modify/create material/profiles files manually, …).

Is there a guide for printing with PVA with this head? Should I use an older version of Cura?

Thank you,  
Eytan