# macOS cura and m175

**URL:** https://forum.lulzbot.com/t/macos-cura-and-m175/22496
**Category:** Uncategorized
**Created:** [October 20, 2020, 11:11pm UTC](https://forum.lulzbot.com/t/macos-cura-and-m175/22496 "2020-10-20T23:11:18Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![Bmarsh](https://avatars.discourse-cdn.com/v4/letter/b/f07891/32.png) [@Bmarsh](https://forum.lulzbot.com/u/Bmarsh)
#### Post date: [October 20, 2020, 11:11pm UTC](https://forum.lulzbot.com/t/macos-cura-and-m175/22496/1 "2020-10-20T23:11:18Z")

</div>

I went to get the latest version for the new toolhead I bought and I found out that the toolhead isn’t supported on the macOS version. Does anyone known when/if 3.6.22 will be released on macOS?

---

<div class="post-metadata">

### Author: ![b-morgan](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/b-morgan/32/11517_2.png) [@b-morgan](https://forum.lulzbot.com/u/b-morgan)
#### Post date: [October 21, 2020, 3:46pm UTC](https://forum.lulzbot.com/t/macos-cura-and-m175/22496/2 "2020-10-21T15:46:59Z")

</div>

The only thing you really need is the firmware. You can copy that out of the Windows package and put it where the macOS version is looking for it.

---

<div class="post-metadata">

### Author: ![rhenderson](https://avatars.discourse-cdn.com/v4/letter/r/9de0a6/32.png) [@rhenderson](https://forum.lulzbot.com/u/rhenderson)
#### Post date: [October 22, 2020, 3:08pm UTC](https://forum.lulzbot.com/t/macos-cura-and-m175/22496/3 "2020-10-22T15:08:53Z")

</div>

If you get in contact with support we have instructions on putting the files in the correct place.