# Matter Control and Lulzbot Taz3 **URL:** \ **Category:** Software\ **Created:** [September 10, 2014, 6:55pm UTC](https://forum.lulzbot.com/t/matter-control-and-lulzbot-taz3/829 "2014-09-10T18:55:54Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![asesapie](https://avatars.discourse-cdn.com/v4/letter/a/3ec8ea/32.png) [@asesapie](https://forum.lulzbot.com/u/asesapie)\ **Post date:** [September 10, 2014, 6:55pm UTC](https://forum.lulzbot.com/t/matter-control-and-lulzbot-taz3/829/1 "2014-09-10T18:55:54Z")
I have the Taz 3 and am using Matter Control with my PC to control the printer. I have everything connected and ready to go. I set the preset temps to ABS (230\*/85\*) and press start. The temps then drop to 185\*/65\* which is not correct. It is like it is a default that I have to override. Does anyone have an idea of how to fix this as I can’t seem to find a resolution my self. Any help would be greatly appreciated. ---
**Author:** ![asesapie](https://avatars.discourse-cdn.com/v4/letter/a/3ec8ea/32.png) [@asesapie](https://forum.lulzbot.com/u/asesapie)\ **Post date:** [September 10, 2014, 8:01pm UTC](https://forum.lulzbot.com/t/matter-control-and-lulzbot-taz3/829/2 "2014-09-10T20:01:36Z")
Got it figured out folks. Found a preset in matter control that needed changed. ---
**Author:** ![bhicks22](https://avatars.discourse-cdn.com/v4/letter/b/bb73d2/32.png) [@bhicks22](https://forum.lulzbot.com/u/bhicks22)\ **Post date:** [September 10, 2014, 8:40pm UTC](https://forum.lulzbot.com/t/matter-control-and-lulzbot-taz3/829/3 "2014-09-10T20:40:44Z")
How do you like mattercontrol? I have been using it now for a few months. At first I had some issues with it, but have figured most of it out. They have come out with a new version that seems to address most of the issues I was having. I now use it over slic3r and cura. Those just gave me too many issues and too many headaches. Seems to be a well thought out slicing software.