# Mini Gen1 Update Cura & Firmware - Won't work

**URL:** <https://forum.lulzbot.com/t/mini-gen1-update-cura-firmware-wont-work/6945>\
**Category:** Software\
**Created:** [October 11, 2019, 9:27pm UTC](https://forum.lulzbot.com/t/mini-gen1-update-cura-firmware-wont-work/6945 "2019-10-11T21:27:17Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![b-morgan](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/b-morgan/32/11517_2.png) [@b-morgan](https://forum.lulzbot.com/u/b-morgan)\
**Post date:** [October 17, 2019, 8:19pm UTC](https://forum.lulzbot.com/t/mini-gen1-update-cura-firmware-wont-work/6945/3 "2019-10-17T20:19:54Z")

</div>

That is the procedure I use. There were multiple flavors of the original Mini so make sure you have selected the correct one. I’d call LulzBot support and if they answer, they should be able to help.

---

_[View the full topic](https://forum.lulzbot.com/t/mini-gen1-update-cura-firmware-wont-work/6945)._