# Mini stopped mid-print, and now unresponsive

**URL:** <https://forum.lulzbot.com/t/mini-stopped-mid-print-and-now-unresponsive/21907>\
**Category:** LulzBot Mini\
**Created:** [June 21, 2020, 2:40pm UTC](https://forum.lulzbot.com/t/mini-stopped-mid-print-and-now-unresponsive/21907 "2020-06-21T14:40:27Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![lrd](https://avatars.discourse-cdn.com/v4/letter/l/b5e925/32.png) [@lrd](https://forum.lulzbot.com/u/lrd)\
**Post date:** [June 23, 2020, 1:23pm UTC](https://forum.lulzbot.com/t/mini-stopped-mid-print-and-now-unresponsive/21907/8 "2020-06-23T13:23:09Z")

</div>

[https://forum.lulzbot.com/t/mini-gen1-update-cura-firmware-wont-work/6945/3](https://forum.lulzbot.com/t/mini-gen1-update-cura-firmware-wont-work/6945/3)

---

_[View the full topic](https://forum.lulzbot.com/t/mini-stopped-mid-print-and-now-unresponsive/21907)._