# Mini Stopped Mid Print on Mac w Cura

**URL:** <https://forum.lulzbot.com/t/mini-stopped-mid-print-on-mac-w-cura/5475>\
**Category:** Software\
**Created:** [January 4, 2018, 5:33pm UTC](https://forum.lulzbot.com/t/mini-stopped-mid-print-on-mac-w-cura/5475 "2018-01-04T17:33:25Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![falv25](https://avatars.discourse-cdn.com/v4/letter/f/c6cbf5/32.png) [@falv25](https://forum.lulzbot.com/u/falv25)\
**Post date:** [January 4, 2018, 5:33pm UTC](https://forum.lulzbot.com/t/mini-stopped-mid-print-on-mac-w-cura/5475/1 "2018-01-04T17:33:25Z")

</div>

I’m on a newer Mac, using Cura 2.6.63.  
Two hours into a print it just stopped. As if it was paused. Cura says it is still connected and printing. Mini on but just sitting there as if it were paused. I tried clicking on the pause button and then resume to see if I could bump it into working but no luck. Software said it paused and then resumed. But the mini did not move. I gave it time to see if it was paused for a reason but nothing changed. When I aborted the print, it aborted and moved like nothing was wrong.

Thoughts?

Thanks!

---

<div class="post-metadata">

**Author:** ![cplprint](https://avatars.discourse-cdn.com/v4/letter/c/f1d935/32.png) [@cplprint](https://forum.lulzbot.com/u/cplprint)\
**Post date:** [August 9, 2018, 12:47pm UTC](https://forum.lulzbot.com/t/mini-stopped-mid-print-on-mac-w-cura/5475/2 "2018-08-09T12:47:57Z")

</div>

I have had a similar issue (Cura 3.2.23 on macOS 10.13.6) printing on a LuzBolt Mini. The printer is really slow or stops randomly during print, while I have not had that issue when printing from a laptop running Windows 8. Any ideas?