# Mini stops feeding filament a quarter way through print

**URL:** <https://forum.lulzbot.com/t/mini-stops-feeding-filament-a-quarter-way-through-print/23468>\
**Category:** Community\
**Created:** [July 5, 2021, 1:12pm UTC](https://forum.lulzbot.com/t/mini-stops-feeding-filament-a-quarter-way-through-print/23468 "2021-07-05T13:12:45Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![b-morgan](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.lulzbot.com/b-morgan/32/11517_2.png) [@b-morgan](https://forum.lulzbot.com/u/b-morgan)\
**Post date:** [July 5, 2021, 9:14pm UTC](https://forum.lulzbot.com/t/mini-stops-feeding-filament-a-quarter-way-through-print/23468/4 "2021-07-05T21:14:55Z")

</div>

Without knowing what fan (or tool head) you have, I can’t say if there is a better fan.

If it is a 40mm x 10mm 5v fan, then yes, there are better fans, [https://forum.lulzbot.com/t/filament-feed-failure/5693/20](https://forum.lulzbot.com/t/filament-feed-failure/5693/20)

How are you controlling / monitoring the temperature in the enclosure? Perhaps the enclosure itself just gets too hot after 3 hours.

---

_[View the full topic](https://forum.lulzbot.com/t/mini-stops-feeding-filament-a-quarter-way-through-print/23468)._